Oversample RS232 RX uart.

1 files changed, 49 insertions, 30 deletions

diff --git a/hdl/rs232.sv b/hdl/rs232.sv
index 9050464..31beb1e 100644
--- a/hdl/rs232.sv
+++ b/hdl/rs232.sv
@@ -87,6 +87,8 @@ module rs232_tx
 endmodule
 
 module rs232_rx
+    #(  OVERSAMPLE = 0
+    )
     (   input   bit         clock
     ,   input   bit         reset
 
@@ -108,6 +110,8 @@ module rs232_rx
     bit         [$clog2(`UART_BYTE_BITS):0] data_bits;
     bit                                     parity;
 
+    bit         [$clog2(OVERSAMPLE+1):0]    sample;
+
     always @(posedge clock, posedge reset) begin
         if (reset) begin
             in_valid = 0;
@@ -115,47 +119,62 @@ module rs232_rx
             buffer = 0;
             data_bits = 0;
             parity = 0;
+            sample = 0;
         end else begin
+            automatic bit ok = 0;
+
             if (in_ready && in_valid)
                 in_valid = 0;
 
-            case (state)
+            if (state == state.first) begin
+                ok = 1;
+            end else begin
+                ++sample;
+                if (sample == OVERSAMPLE+1) begin
+                    sample = 0;
+                    ok = 1;
+                end
+            end
+
+            if (ok) begin
+                case (state)
 
-                START: begin
-                    if (rx == 0) begin
-                        state = state.next;
-                        buffer = 0;
-                        data_bits = 0;
-                        parity = 0;
+                    START: begin
+                        if (rx == 0) begin
+                            state = state.next;
+                            buffer = 0;
+                            data_bits = 0;
+                            parity = 0;
+                        end
                     end
-                end
 
-                DATA: begin
-                    buffer[data_bits] = rx;
-                    parity = parity ^ rx;
-                    if (data_bits == `UART_BYTE_BITS-1)
-                        state = state.next;
-                    else
-                        ++data_bits;
-                end
+                    DATA: begin
+                        buffer[data_bits] = rx;
+                        parity = parity ^ rx;
+                        if (data_bits == `UART_BYTE_BITS-1)
+                            state = state.next;
+                        else
+                            ++data_bits;
+                    end
 
-                PARITY: begin
-                    parity = parity ^ rx;
-                    if (parity == 0)
-                        state = state.next;
-                    else
-                        state = state.first;
-                end
+                    PARITY: begin
+                        parity = parity ^ rx;
+                        if (parity == 0)
+                            state = state.next;
+                        else
+                            state = state.first;
+                    end
 
-                STOP: begin
-                    if (!in_valid && rx == 1) begin
-                        in_valid = 1;
-                        in_data = buffer;
+                    STOP: begin
+                        if (!in_valid && rx == 1) begin
+                            in_valid = 1;
+                            in_data = buffer;
+                        end
+                        state = state.next;
                     end
-                    state = state.next;
-                end
 
-            endcase
+                endcase
+            end
         end
     end