path: root/hdl/core.sv

`include "util.svh"

module core
    #(  ADDR_BITS   = 12
    ,   DATA_BITS   = 12
    )
    (   input   bit clk
    ,   input   bit reset
    );

bit mem_ready;
bit mem_valid;
bit mem_write;
bit [ADDR_BITS-1:0] mem_address;
bit [DATA_BITS-1:0] mem_write_data;

bit mem_read_valid;
bit [DATA_BITS-1:0] mem_read_data;

mem
    #(  .ADDR_BITS(ADDR_BITS)
    ,   .DATA_BITS(DATA_BITS)
    ,   .INIT_FILE("build/mem/hello.hex")
    )
    memory
    (   .clk(clk)
    ,   .reset(reset)

    ,   .ready(mem_ready)
    ,   .valid(mem_valid)
    ,   .address(mem_address)
    ,   .write(mem_write)
    ,   .write_data(mem_write_data)

    ,   .read_valid(mem_read_valid)
    ,   .read_data(mem_read_data)
    );

bit rx_ready;
bit rx_valid;
bit [7:0] rx_data;

bit tx_ready;
bit tx_valid;
bit [7:0] tx_data;

jtag_uart
    #(  .INSTANCE(0)
    ) uart0
    (   .clk(clk)
    ,   .reset(reset)

    ,   .rx_ready(rx_ready)
    ,   .rx_valid(rx_valid)
    ,   .rx_data(rx_data)

    ,   .tx_ready(tx_ready)
    ,   .tx_valid(tx_valid)
    ,   .tx_data(tx_data)
    );

bit [ADDR_BITS-1:7] page;

bit [ADDR_BITS-1:0] pc;
bit [2:0] opcode;
bit [8:0] operand;
bit [DATA_BITS-1:0] acc;
bit link;

bit i;
bit z;
bit [6:0] wip;
bit [ADDR_BITS-1:0] address;

enum
    {   FETCH
    ,   DECODE
    ,   INDIRECT
    ,   INDIRECTED
    ,   PREINC
    ,   AGEN
    ,   EXEC
    ,   MEMWAIT
    ,   HALT
    } state;

always_ff @(posedge clk) begin
    if (reset) begin
        mem_valid = 0;
        rx_ready = 0;
        tx_valid = 0;
        tx_data = 0;
        pc = 'o200;
        acc = 0;
        link = 0;
        state = state.first;
    end else begin
        if (`lag(tx_ready)) tx_valid = 0;

        case (state)
            FETCH: begin
                mem_valid = 1;
                mem_address = pc;
                mem_write = 0;
                if (`lag(mem_ready)) begin
                    state = DECODE;
                    page = pc[ADDR_BITS-1:7];
                    ++pc;
                end
            end

            DECODE: begin
                mem_valid = 0;
                mem_write = 0;
                if (`lag(mem_read_valid)) begin
                    state = FETCH;
                    {opcode, operand} = `lag(mem_read_data);
                    $display("%d decode %x: %b %b", $time, pc-1, opcode, operand);
                    {i, z, wip} = operand;
                    if (z)
                        address = {page, wip};
                    else
                        address = {5'b0, wip};
                    case (opcode)
                        'b000, 'b001, 'b010: state = i ? INDIRECT : AGEN;
                        'b011, 'b100: state = i ? INDIRECT : EXEC;
                        'b101: begin
                            if (i) begin
                                state = INDIRECT;
                            end else begin
                                pc = address;
                            end
                        end
                        'b111: begin
                            casez (operand)
                                'b0????????: begin
                                    automatic bit cla, cll, cma, cml, rar, ral, bsw, iac;
                                    {cla, cll, cma, cml, rar, ral, bsw, iac} = operand[7:0];
                                    if (cla) acc = 0;
                                    if (cll) link = 0;
                                    if (cma) acc = ~acc;
                                    if (cml) link = ~link;
                                    if (iac) {link, acc} += 1;
                                    if (rar && !ral) begin
                                        {link, acc} = {acc[0], link, acc[11:1]};
                                        if (bsw) {link, acc} = {acc[0], link, acc[11:1]};
                                    end
                                    if (ral && !rar) begin
                                        {link, acc} = {acc, link};
                                        if (bsw) {link, acc} = {acc, link};
                                    end
                                    if (bsw && !(rar || ral)) acc = {acc[5:0], acc[11:6]};
                                end
                                'b1????0??0: begin
                                    automatic bit cla, sma, sza, snl, osr, hlt;
                                    automatic bit skip;
                                    {cla, sma, sza, snl, osr, hlt} = {operand[7:4], operand[2:1]};
                                    skip = 0;
                                    if (sma && acc[11]) skip = 1;
                                    if (sza && acc == 0) skip = 1;
                                    if (snl && link != 0) skip = 1;
                                    if (skip) pc++;
                                    if (cla) acc = 0;
                                    if (osr) begin
                                        $display("unsupported front panel switch test");
                                        $finish;
                                    end
                                    if (hlt) state = HALT;
                                end
                                'b1????1??0: begin
                                    automatic bit cla, spa, sna, szl, osr, hlt;
                                    automatic bit skip;
                                    {cla, spa, sna, szl, osr, hlt} = {operand[7:4], operand[2:1]};
                                    skip = 1;
                                    if (spa && acc[11]) skip = 0;
                                    if (sna && acc == 0) skip = 0;
                                    if (szl && link != 0) skip = 0;
                                    if (skip && (spa || sna || szl)) pc++;
                                    if (cla) acc = 0;
                                    if (osr) begin
                                        $display("unsupported front panel switch test");
                                        $finish;
                                    end
                                    if (hlt) state = HALT;
                                end
                                default: begin
                                    $display("%d decoded unknown opcode %x: %b %b", $time, pc-1, opcode, operand);
                                    $finish;
                                end
                            endcase
                        end
                        'b110: begin
                            case (operand[8:3])
                                'b000100: begin
                                    case (operand[2:0])
                                        'b001: if (!tx_valid) pc++;
                                        'b110: begin
                                            tx_valid = 1;
                                            tx_data = {1'b0, acc[6:0]};
                                        end
                                        default: begin
                                            $display("unsupported device op %b", operand[2:0]);
                                            $finish;
                                        end
                                    endcase
                                end
                                default: begin
                                    $display("unsupported device %b", operand[8:3]);
                                    $finish;
                                end
                            endcase
                        end
                        default: begin
                            $display("%d decoded unknown opcode %x: %b %b", $time, pc-1, opcode, operand);
                            $finish;
                        end
                    endcase
                end
            end

            INDIRECT: begin
                mem_valid = 1;
                mem_write = 0;
                mem_address = address;
                state = `lag(mem_ready) ? INDIRECTED : INDIRECT;
            end

            INDIRECTED: begin
                if (`lag(mem_ready)) begin
                    mem_valid = 0;
                    mem_write = 0;
                end
                if (`lag(mem_read_valid)) begin
                    if (address[7:3] == 5'b00001) begin
                        address = {{(ADDR_BITS - DATA_BITS){1'b0}}, `lag(mem_read_data)};
                        address += 1;
                        state = PREINC;
                    end else begin
                        address = {{(ADDR_BITS - DATA_BITS){1'b0}}, `lag(mem_read_data)};
                        case (opcode)
                            'b000, 'b001, 'b010: state = AGEN;
                            'b011, 'b100: state = EXEC;
                            'b101: begin
                                pc = address;
                                state = FETCH;
                            end
                        endcase
                    end
                end
            end

            PREINC: begin
                mem_valid = 1;
                mem_write = 1;
                mem_write_data = address[DATA_BITS-1:0];
                case (opcode)
                    'b000, 'b001, 'b010: state = `lag(mem_ready) ? AGEN : PREINC;
                    'b011, 'b100, 'b101: state = `lag(mem_ready) ? EXEC : PREINC;
                endcase
            end

            AGEN: begin
                mem_valid = 1;
                case (opcode)
                    'b000, 'b001, 'b010: mem_write = 0;
                endcase
                mem_address = address;
                state = `lag(mem_ready) ? EXEC : AGEN;
            end

            EXEC: begin
                automatic bit stall = 0;
                if (`lag(mem_ready)) begin
                    mem_valid = 0;
                    mem_write = 0;
                end else if (mem_valid) begin
                    stall = 1;
                end
                case (opcode)
                    'b000, 'b001, 'b010: if (! `lag(mem_read_valid)) stall = 1;
                endcase
                if (! stall) begin
                    state = FETCH;
                    case (opcode)
                        'b000: acc &= `lag(mem_read_data);
                        'b001: {link, acc} += {1'b0, `lag(mem_read_data)};
                        'b010: begin
                            mem_valid = 1;
                            mem_address = address;
                            mem_write = 1;
                            mem_write_data = `lag(mem_read_data) + 1;
                            if (mem_write_data == 0) ++pc;
                            state = MEMWAIT;
                        end
                        'b011: begin
                            mem_valid = 1;
                            mem_address = address;
                            mem_write = 1;
                            mem_write_data = acc;
                            acc = 0;
                            state = MEMWAIT;
                        end
                        'b100: begin
                            mem_valid = 1;
                            mem_address = address;
                            mem_write = 1;
                            mem_write_data = pc[DATA_BITS-1:0];
                            pc = address + 1;
                            state = MEMWAIT;
                        end
                        'b101: pc = address;
                    endcase
                end
            end

            MEMWAIT: state = `lag(mem_ready) ? FETCH : MEMWAIT;

            HALT: begin
                $display("%d halt state reached", $time);
                $finish;
            end
        endcase
    end
end

endmodule