summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* Only phase shift the RS232 tx clock when we are between bytes.Julian Blake Kongslie2022-05-152-1/+22
|
* Consistent RS232 wire names (DCE side names is used everywhere)Julian Blake Kongslie2022-05-153-39/+39
|
* Change makefile to unconditionally load memory for 16 PDP-8sJulian Blake Kongslie2022-05-151-14/+14
|
* Remove extraneous newline (we still have some other one somewhere)Julian Blake Kongslie2022-05-081-1/+1
|
* Make the calculation for OVERSAMPLE more explicit.Julian Blake Kongslie2022-05-081-1/+1
|
* Demand that CTS is asserted for multiple symbol periods before transmit.Julian Blake Kongslie2022-05-081-1/+8
|
* *Proper* serial port for memory downloads. 115200 8O2 RS232 with CRTRTS.Julian Blake Kongslie2022-05-0811-132/+322
|
* Make the script for setting up the TTY actually connect.Julian Blake Kongslie2022-04-241-0/+6
|
* Add a quick and dirty script to set expected RS232 terminal settings.Julian Blake Kongslie2022-04-221-0/+23
|
* Oversample RS232 RX uart.Julian Blake Kongslie2022-04-222-42/+77
|
* Asynchronous reset on RS232 uart.Julian Blake Kongslie2022-04-221-2/+2
|
* Transmit and receive an even parity bit in RS232 uart.Julian Blake Kongslie2022-04-221-0/+23
|
* Transmit two stop bits to RS232 uart.Julian Blake Kongslie2022-04-221-2/+8
|
* Refer to wrap bits instead of previous greycode in FIFO greycode calculation.Julian Blake Kongslie2022-04-171-2/+2
|
* Fix whitespace/maxlinesize handling in p8bin2uart.Julian Blake Kongslie2022-04-171-8/+7
|
* Working (but very slow) RS232 UARTJulian Blake Kongslie2022-04-175-35/+165
|
* Integrate wrap bits into grey code for FIFO.Julian Blake Kongslie2022-03-281-5/+8
|
* Update PLAN.Julian Blake Kongslie2022-03-271-13/+10
|
* 12 PDP-8s! :-)Julian Blake Kongslie2022-03-271-1/+1
|
* A more-fair memory arbiter that actually works.Julian Blake Kongslie2022-03-271-31/+34
|
* Add RX/TX/RTS/CTS pin assignments for future RS232 work.Julian Blake Kongslie2022-03-271-0/+5
|
* Use the DF and IF switches as a selector for which PDP-8 owns the panel.Julian Blake Kongslie2022-03-271-89/+92
|
* Add a clock output pin for debugging the PLL.Julian Blake Kongslie2022-03-272-0/+5
|
* Attempt to make somewhat less error-prone downloads.Julian Blake Kongslie2022-03-272-6/+5
|
* Reduce internal clock speed to 30MHz.Julian Blake Kongslie2022-03-272-3/+3
|
* Attempt to download for 16 PDP-8s.Julian Blake Kongslie2022-03-271-8/+16
|
* Don't use SystemVerilog parametric types because Altera doesn't support them.Julian Blake Kongslie2022-03-271-9/+9
|
* First pass at RS232 tx/rx modules.Julian Blake Kongslie2022-03-271-0/+131
|
* Add basic clock-domain-crossing FIFO.Julian Blake Kongslie2022-03-261-0/+68
|
* Run ~*EIGHT GODDAMN PDP-8s IN PARALLEL*~Julian Blake Kongslie2022-03-203-48/+127
| | | | | | It looks like we could probably fit 16 on the current FPGA, just about. (doesn't meet timing at 50MHz, should in theory work at 40MHz)
* Cleanup of PDP-8 core to support arbitrated memory protocol.Julian Blake Kongslie2022-03-201-190/+109
| | | | No support yet for multiple words per line; otherwise complete.
* Support loading RIMs and multi-word lines via the UART loader.Julian Blake Kongslie2022-03-202-12/+24
|
* Add a few useful memory images.Julian Blake Kongslie2022-03-205-4141/+0
|
* Temporary change to PDP-8 internal memory to match controller protocolJulian Blake Kongslie2022-03-201-57/+86
|
* Clean up p8bin2uart and support dumping multiple words per line.Julian Blake Kongslie2022-03-181-27/+73
|
* Redraw the diagram in PLAN to make it a little prettier.Julian Blake Kongslie2022-03-181-23/+46
|
* Minor paranoia about ensuring that we're in the correct half_stateJulian Blake Kongslie2022-03-181-0/+1
| | | | coming out of t_rwr delay between memory transactions
* Ignore colons on inputs; use them to separate words in output.Julian Blake Kongslie2022-03-182-7/+19
|
* Trivial change to make it a little easier to understand the mem arbiter.Julian Blake Kongslie2022-03-181-1/+1
|
* Add a few notes.Julian Blake Kongslie2022-03-131-0/+12
|
* Import p8bin2* tools into repo.Julian Blake Kongslie2022-03-132-0/+334
|
* Change command parser to support bulk download script.Julian Blake Kongslie2022-03-132-23/+118
|
* Add memory arbiter and broadcast in between command UART and DRAM.Julian Blake Kongslie2022-03-133-17/+203
|
* Fix DRAM timings to avoid back-to-back transactions.Julian Blake Kongslie2022-03-131-3/+11
|
* Change FIFO size for UARTs to 1024 bytes in each direction.Julian Blake Kongslie2022-03-132-4/+4
|
* Print a newline after memory read result prints.Julian Blake Kongslie2022-03-131-26/+32
|
* Adding packed keyword to structs and tweaking tag_t slightly.Julian Blake Kongslie2022-03-131-7/+7
|
* Reformat PLAN to be a little prettier.Julian Blake Kongslie2022-03-131-17/+24
|
* Switch back to focal69 instead of broken hello.pal.Julian Blake Kongslie2022-03-011-2/+1
|
* Don't use the bottom data bit as the ready signal :-DJulian Blake Kongslie2022-02-281-1/+1
|
generated by cgit v1.2.3 (git 2.51.0) at 2026-04-19 00:42:47 -0700